喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有請放心下載，.dwg格式文件為原稿CAD圖紙，可自行編輯修改【QQ：1304139763可咨詢交流】====================
喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有請放心下載，.dwg格式文件為原稿CAD圖紙，可自行編輯修改【QQ：1304139763可咨詢交流】====================
中 英 文 摘 要
摘要:
本文分為兩大部分, 第一部分是機械結構的設計, 內容包括塑料注塑模具的工作原理及應用, 設計準則以及產品的見解. 塑料注塑模具的設計計算, 包括模具結構設計, 注射機的選用, 澆注系統設計等方面. 第二部分是介紹CAD/CAM在模具上的應用, 包括CAXA制造工程師, ＣＡＸＡ實體設計，ＡutoCAD.
關鍵詞：
CAD/CAM, 塑料，注塑模，注塑機
Abstract:
In this paper, it is divided into two parts. The fist part is about the design of the structure of the mould. It is including the working theory and application of a plastic injection mold, the design princible, and the introducing of production. The design calculation of the plastic mold is including the disign of the mold,the selecting og plastic injection mold machine, and the pour system disigb etc. The second part is about the application of the CAD/CAM in plastic injection mold. It include the software of CAXA AutoCAD and so on.
Key Words:
CAD/CAM, plastic, plastic injection mold, plastic injection mold machine
外 文 翻 譯
Clutch
The clutch is located in the power train between the engine and the transmission. Its purpose is to permit the driver to couple or uncouple the engine and transmission.
The clutch is a friction-type uncoupling device. It is linked to a clutch pedal in the river’s compartment. When the driver pushes down the clutch pedal, the linkage forces a flat disk, or plate, to move. The movement releases the pressure from a friction disk. With the pressure released. There is no friction at work in the clutch. And the power flow is therefore interrupted. Then, the engine runs without transmitting power to the power train.
When the clutch is in the coupling(or normal running) position, power flows through it from the engine to the transmission. If the transmission is in gear, then power flows on through to the car wheels so that the car moves.
Essentially , then, the clutch ha the job of permitting the driver to uncouple the engine temporarily so that the gears can be shifted from one to another forward gear position (or into reverse or neutral).It is necessary to interrupt the flow of power( by uncoupling) before gears are shifted. Otherwise, gear shifting would be extremely difficult if not impossible.
The clutch contains friction disk(or driven plate)about 300millimetre in diameter. It also contains a spring arrangement and a pressure plate for pressing this disk tightly against the smooth rear face of the flywheel. The friction disk is splined to the clutch shaft. The splines consist of two sets of teeth, an internal set on the hub of the friction disk and a matching external set on the clutch shaft. They permit the friction disk to slide back and forth along the shaft but force the disk and the shaft to rotate together. All automotive clutches used with standard transmissions are very similar in construction and operation. There are some differences in the details of the linkages as well as in the pressure-plate assemblies. In addition , some clutches for heavy-duty applications have two friction disks and an intermediate pressure plate. Also, some clutches are operated by hydraulic means. Three types of clutch are the coil-pressure-spring type, diaphragm-spring type, and semicentrefugal type. Cars equipped with automatic transmission operateds automatically so that the driver is not required to use a clutch to shift gears.
離 合 器
在傳動系統中,離合器位于發動機與變速器之間,其作用是使駕駛員可以把發動機與變速器結合或脫離.
離合器是一種摩擦式分離裝置,與駕駛室中離合踏板相連接. 當駕駛員踩下離合器踏板時, 聯動裝置使離合器的壓盤移動. 這一運動減少了作用在摩擦盤上的壓力. 隨著壓力的減小, 離合器工作狀態下的摩擦力消失,動力被切斷. 這樣, 雖然發動機仍在轉動, 而動力卻不在傳遞到傳動系統.
當離合器處于結合狀態時(或者說處于正常運行狀態時),動力從發動機傳遞到變速器. 如果變速器已掛上適當?shù)臋n位,那么動力就會傳動到車輪上, 汽車即開動起來.從本質上說, 離合器的作用是使駕駛員可以暫時地切斷發動機的動力. 這樣一來,傳動裝置就可以從某一檔換到另一檔(或者換到倒檔或空檔).在變速之前,一定要切斷動力傳遞.不然,換檔即使不是完全不可能, 也會是十分困難的.
離合器有一直徑大約300毫米, 并帶有摩擦襯片的圓盤, 還有一彈簧裝置和一壓力盤, 用來把摩擦盤緊緊地壓在飛輪光滑地壁面上. 帶有摩擦襯片的圓盤, 通過花鍵與離合器軸相連. 花鍵包括二套花鍵齒. 可以使摩擦盤沿著主軸向后或向前滑動, 又可以使圓盤和主軸同時移動.
所有使用標準傳動系統的汽車離合器在構造和操作上都很相似. 只是在壓緊機構和連動裝置的細節上稍有不同. 此外, 一些在重載荷情況下工作的離合器,有兩個帶摩擦襯片的圓盤和一個中間壓力盤. 還有一些離合器是液壓式的. 離合器的三種類型為:螺旋彈簧式, 嗼片彈簧式和半離心式.
裝有自動變速裝置的汽車一般不需要離合器. 在這些汽車上, 變速器自動操作, 因此駕駛員不必使用離合器來換檔.
Brake System
Brakes are necessary to slow or stop the car. Modern cars can travel very fast, so good brakes are essential for safety. Practically all cars use hydraulics brakes (which operate by applying pressure to a fluid). The brakes system can be divided into two principal parts, hydraulic system and wheel brake assemblies.
In most modern brake systems, there is a fluid-filled cylinder, called the master cylinder, which contains two separate sections, there is a piston in each section and both pistons are connected to a brake pedal in the driver’s compartment. When the brake pedal is pushed by the driver the two pistons move in the two sections of the master cylinder. This forces brake fluid out and through the brake lines, or tubes , to the brake mechanisms at the wheels. In a typical system, the brake fluid from one section of the master cylinder goes to the two front-wheel brakes. The brake fluid from the other section goes to the two rear-wheel brakes. The purpose of this is that, if one section fails, the other section will still provide braking.
There are two different types of brake mechanisms at the wheels, the drum-and-shoe type of brake , and the disk type. In the drum-and-shoe type, there is a wheel brake cylinder with two pistons. When brake fluid is forced into the brake cylinder by the action at the master cylinder , the two pistons are forced outward. This causes the curved brake shoes to move into contact with the brake drum. The brake shoes apply friction to the brake drum, forcing it and the wheel to slow or stop.
In the disk type, a rotating disk, attached to the wheel , is positioned between flat brake shoes. One or more pistons, actuated by the brake fluid from the master cylinder , force the shoes into contact with the rotating disk and this slows or stops the car.
制 動 系 統
制動系統必須能夠強制汽車減速或停車. 現代汽車速度很快, 良好的制動系統是安全的基本保證. 實際上所有的汽車都使用液壓制動(通過向液體加壓來完成的).制動系統可以分為兩個基本部分: 液壓系統和車輪制動總成.
大多數現代制動系統中具有充滿液體的油缸, 叫做主缸, 主缸有兩套各自獨立的管路,每套管路各有一活塞, 并且兩個活塞都與駕駛室中的制動踏板相連接. 當駕駛員踩動踏板時, 主缸的這兩套管路中的兩個活塞移動. 制動液從主缸中壓出, 經油管進入各個車輪的制動裝置中. 其目的是,如果其中一條管路失靈, 那么另一條關路仍然能夠提供制動.
車輪上有兩種不同的制動機構: 蹄-鼓式制動器和盤式制動器. 在蹄-鼓式制動器中,有一個帶有兩個活塞的制動輪缸. 當制動液由于主缸的作用強制進入輪缸時,推動兩個活塞向外側移動. 這使得圓弧狀的制動蹄與制動鼓想接觸. 制動蹄對制動鼓所產生的摩擦力迫使制動鼓和車輪減速或停車.
在盤式制動器中, 制動盤位于制動蹄之間, 與車輪相連接, 隨車輪一起轉動. 主缸的制動液推動一個或多個活塞, 將制動蹄片壓在轉動的制動盤上, 使汽車減速或停下.