機械畢業設計-俯采式采煤機結構設計（全套含CAD圖紙）

機械畢業設計-俯采式采煤機結構設計（全套含CAD圖紙）,機械,畢業設計,俯采式,采煤,結構設計,全套,cad,圖紙 摘 要 國內薄煤層開采在許多礦井中都面臨著很多的問題，而朔里礦區也是如此。隨著礦井可采儲量的日益枯竭，薄煤層的開采問題已越來越突出。 由于開采設備原因，對于1.3～1.5m的較薄煤層開采，機械化程度普遍不高，其生產效率也比較低。薄煤層開采制約了下序其它煤層的開采速度，直接影響著 礦井高產高效生產。較薄煤層使用大架型機械設備進行開采，不僅開采成本增高，而且頂板常會被切割，導致煤炭灰分增高，甚至資源不能得到回收。 目前國內的薄 煤層綜采技術，尤其是綜采機械化裝備配套技術還很不成熟，正處于探索階段。對于大傾角較薄煤層綜采方面的現場技術實踐就更少了， 其理論研究工作也相對薄弱。根據我們朔里礦業的自然資源情況，有些就屬于大傾角薄煤層。因此，積極探索機械化開采途徑就很有必要。 本課題分析的在機械式采煤機基礎上改成液壓式的采煤機。主要進行了液壓式俯采采煤機總體方案設計，液壓式俯采采煤機截煤部結構設計，液壓式俯采采煤機牽引部結構設計及計算。 關鍵詞：煤層；開采；機械式；液壓式 ABSTRACT The thin coal seam mining are facing a lot of problems in many mines, and Shuoli kaolin and so. With the increasing depletion of the mine recoverable reserves, mining of thin coal seam has been more and more prominent. Because of mining equipment, for 1.3 ~ 1.5m of thin seam mining, the degree of mechanization is generally not high, the production efficiency is low. Thin coal seam mining restricts the speed of order other coal mining, directly affects the high production and high efficient mine. The thin coal seam with large mechanical equipment for mining, not only the mining cost increased, and the roof is often cut, resulting in coal ash content increased, and even the resources can not be recovered. Thin seam mining technology in China at present, especially the fully mechanized mining equipment technology is not very mature, is in the stage of exploration. For the practical field large inclination of thin seam mining area is less, the theoretical research is relatively weak. According to the mining of natural resources of our moon, some belong to the thin coal seam with large inclined angle. Therefore, it is necessary to explore the positive mechanized mining method. Analysis on the mechanical coal mining machine based on the change of the coal mining machine hydraulic. Mainly to the overall scheme design of hydraulic shearer underhand, shearer cutting structure design of hydraulic bent mining, hydraulic down coal shearer structure design and calculation. Keywords: coal seam; mining machinery; hydraulic; 目 錄 第1章 緒 論 - 1 - 1.1 采煤機國內外研究現狀 - 1 - 1.2大傾角薄煤層開采技術及設備概述 - 2 - 1.2.1 概述 - 2 - 1.2.2 選擇合適的綜采配套設備 - 2 - 1.2.3 回采技術工藝 - 3 - 1.2.4 支架和運輸機防倒滑措施 - 3 - 第2章 液壓式俯采采煤機總體方案設計 - 5 - 2.1 采煤機牽引部液壓系統得特點 - 5 - 2.2 設計參數 - 5 - 2.3 主油路系統 - 5 - 2.4 調速及換向回路 - 7 - 2.5 保護系統 - 8 - 2.5.1 電動機功率過載保護 - 8 - 2.5.2 高壓保護 - 8 - 2.5.3 低壓欠壓保護 - 8 - 2.5.4 停機油泵自動回零保護 - 8 - 2.5.5 閉式系統充油排氣 - 9 - 第3章 液壓式俯采采煤機截割部結構設計 - 10 - 3.1 截割部概述 - 10 - 3.2 截割部特點 - 10 - 3.3 齒輪傳動的設計計算 - 10 - 3.3.1 第一傳動組齒輪設計計算 - 10 - 3.3.2 第二傳動組齒輪設計計算 - 20 - 3.3.3 第三傳動組齒輪設計計算 - 27 - 3.4 截一軸及其軸承壽命驗算 - 35 - 3.4.1 求軸上的載荷 - 35 - 3.4.2 校核該軸的強度 - 37 - 3.5 截二軸的詳細校核 - 37 - 3.5.1 求軸上的載荷 - 37 - 3.5.2 校核該軸的強度 - 39 - 3.6 截三軸的詳細校核 - 39 - 3.6.1 求軸上的載荷 - 39 - 3.6.2 校核該軸的強度 - 41 - 3.6.3 軸承壽命的驗算 - 42 - 第4章 液壓式俯采采煤機牽引部結構設計 - 43 - 4.1 牽引部傳動系統的分析 - 43 - 4.2 各級齒輪的傳動比的確定 - 43 - 4.3 主油泵和馬達的計算 - 43 - 4.4 回路泵的選擇 - 47 - 4.5 采煤機牽引部液壓控制元件的選擇 - 48 - 4.6 牽引部液壓系統的壓力損失驗算 - 50 - 4.7 牽引部液壓系統得溫升驗算 - 51 - 4.8 牽引部輔助裝置液壓傳動系統 - 52 - 總 結 - 54 - 參 考 文 獻 - 55 - 致 謝 - 56 - - 4 -