齒輪軸加工工藝規程設計
摘要
本文是對齒輪軸零件加工應用及加工的工藝性分析,主要包括對零件圖的分析、毛坯的選擇、零件的裝夾、工藝路線的制訂、刀具的選擇、切削用量的確定、加工工藝文件的填寫。選擇正確的加工方法,設計合理的加工工藝過程。此外還對支架零件的兩道工序的加工設計了專用夾具.
機床夾具的種類很多,其中,使用范圍最廣的通用夾具,規格尺寸多已標準化,并且有專業的工廠進行生產。而廣泛用于批量生產,專為齒輪軸工件加工工序服務的專用夾具,則需要各制造廠根據工件加工工藝自行設計制造。本論文夾具設計的主要內容是設計專用夾具。
關鍵詞 齒輪軸,加工工藝,專用夾具,設計
I
Abstract
This paper is the analysis of the gear shaft parts processing technology application and processing, including the parts diagram analysis, the choice of blank, parts of the fixture, the formulation of the process route, tool selection, cutting, processing documents. Choose the correct processing methods, design the reasonable process. In addition, processing of two processes to support part of the design of special fixture.
Many kinds of the machine tools fixture, the fixture, the most widely used, the size has been standardized, and there is a professional factory production. But widely uses in the volume production, specially the special fixture for gear shaft workpiece machining processes and services, to the factory according to the workpiece machining process to design and manufacture. The main content of this thesis is to design of fixture design fixture.
Keywords gear shaft, machining process, fixture, design
目錄
引言 3
1 緒論 4
1.1 機械加工工藝概述 4
1.2機械加工工藝流程 4
1.3夾具概述 5
1.4機床夾具的功能 5
1.5機床夾具的發展趨勢 6
1.5.1機床夾具的現狀 6
1.5.2 現代機床夾具的發展方向 6
2 工藝規程設計 8
2.1 零件的分析 8
2.1.1 零件的作用 8
2.1.2 零件的工藝分析 8
2.2 工藝規程設計 9
2.2.1 確定毛坯的制造形式 9
2.2.2 基面的選擇 9
2.2.3 制定工藝路線 10
2.2.4 機械加工余量,工序尺寸及毛坯尺寸的確定 13
2.2.5 確定切削用量 13
3 基本工時 27
4 銑16槽夾具設計 31
4.1研究原始質料 31
4.2定位基準的選擇 31
4.3 切削力及夾緊分析計算 31
4.4 誤差分析與計算 33
4.5 定向鍵與對刀裝置設計 34
4.6 夾具設計及操作的簡要說明 35
結論 37
致謝 38
參考文獻 39
3