LS型螺旋輸送機設計【含10張CAD圖紙、說明書】

LS 螺旋輸送機設計摘要 ：LS 型螺旋輸送機是采用國際標準產品,等效采用 ISO1050-75 標準,設計制造符合 ZBJ1005.1-2-88 專業標準。其技術指標先進，結構新穎，是我國九十年代替代GX 型螺旋輸送機的換代產品。 LS 型螺旋輸送機的 應用范圍：螺旋機被廣泛地使用在各種工業部門，如建材、電力、化工、冶金、煤炭、機械、 輕工、糧食及食品行業。LS 螺旋輸送機對輸送物料的要求，粉狀、粒狀和小 塊狀物料。如：水泥、煤粉、糧食、化肥、灰渣、砂子等，物料溫度不得超過 200℃，螺旋機不宜輸送易變質的、粘性大的、易結塊的物料。因為這 些物料在輸送時在一螺旋上，并隨之旋轉而不向前移動，或者在吊軸承處形成物料的積塞而會粘結使螺旋機不能正常工作。LS 螺旋機的工作環境應在-20 ℃~50℃之間，允許稍微傾斜使用，最大傾角不得超過 20℃。本次LS 螺旋輸送機設計主要分析了粉狀物料輸送的相關參數。 要求被輸送物料的名稱及特性來設計，按螺旋輸送機驅動方式，我 們選擇了單端驅動。 查閱了相關資料，才完成圖紙模型到圖紙 數據， 這都是強有力的效果。關鍵詞：LS螺旋輸送機；物料；應用范圍；技術參數。LS spiral conveyer design Abstract: The LS spiral conveyer uses the international standard product, equivalent uses the ISO1050-75 standard, the design manufacture conforms to the ZBJ1005.1-2-88 specialized standard. Its technical specification is advanced, the structure is novel, is our country substitutes the GX spiral conveyer's update product in the 90s. LS spiral conveyer's application scope:The screw machine widely is used in each Industry sector, like building materials, electric power, chemical industry, metallurgy, coal, machinery, light industry, grain and food profession. The LS spiral conveyer to transports the material the request, powdery, granular and small massive material. For example: The cement, the powdered coal, the grain, the chemical fertilizer, the ash dregs, the sand and so on, the material temperature do not surpass 200℃, the screw machine is not suitable transports the material which the instable archery target, the coherency big, easy to agglomerate. Because these materials in transportation time will cake on a screw, and along with it revolving, but not the forward motion, or will form the material in the suspension bearing place the product to fill enables the screw machine the normal work. The LS screw's machine working conditions should in - 20℃~50℃, the permission incline slightly the use, the maximum inclination angle do not surpass 20℃. This LS spiral conveyer design has mainly analyzed the powdery material handling's related parameter. The request is transported the material the name and the characteristic designs, according to the spiral conveyer drive type, we have chosen the single end actuation. Has consulted the correlation data, only then completes the blueprint model to the blueprint data, this is the powerful effect. Keyword: LS spiral conveyer; Material; Application scope; Technical parameter. 目 錄1 引言…………………………………………………………………………………12 螺旋輸送機主要構件的設計和選用………………………………………12.1 螺旋輸送機的一般結構…………………………………………………………12.1.1 螺旋輸送機的類型………………………………………………………………22.1.2 螺旋輸送機的特點………………………………………………………………32.2 螺旋輸送機的主要構件…………………………………………………………42.2.1 螺旋體……………………………………………………………………………42.2.2 軸承………………………………………………………………………………92.2.3 機槽………………………………………………………………………………112.2.4 驅動裝置 153 水平螺旋輸送機的工作過程分析…………………………………………173.1 物料的運動分析和葉片的設計…………………………………………………173.1.1 物料的運動分析…………………………………………………………………173.1.2 葉片的設計………………………………………………………………………214 總體設計計算……………………………………………………………………264.1 原始資料…………………………………………………………………………264.1.1 被輸送物料的名稱及特性………………………………………………………264.1.2 選型要求…………………………………………………………………………264.2 螺旋輸送機的設計計算…………………………………………………………264.2.1 確定螺旋直徑……………………………………………………………………264.2.2 確定螺旋轉速……………………………………………………………………274.2.3 功率的計算………………………………………………………………………274.2.3 電機的選擇………………………………………………………………………285 總體尺寸設計……………………………………………………………………295.1 LS 螺旋輸送機的外形及尺寸……………………………………………………295.1.1 長度與組合………………………………………………………………………305.2 附件尺寸…………………………………………………………………………305.2.1 進料口……………………………………………………………………………305.2.2 出料口……………………………………………………………………………326 用 solidworks 對一個主要零件進行有限元分析……………………337 結論…………………………………………………………………………………38參考文獻………………………………………………………………………………39致謝……………………………………………………………………………………40