購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
目 錄
第一章 對塑件進行工藝分析·························1
1.1分析塑件使用材料的種類及其工藝性··········································1
1.2分析塑件結構工藝性························································1
第二章選擇注射機確定型腔數························2
2.1根據塑件的形狀估算其體積和重··············································2
2.2選擇設備型號規格,確定型腔數················································2
2.2.1注射機額定注射量·····················································2
2.2.2根據塑件精度確定型腔數···············································3
2.2.3根據生產批量確定型腔數···············································3
第三章確定成型方案································5
3.1確定成型位置······························································5
3.2確定分型面································································5
3.3脫模方式··································································5
3.4澆注系統形成······························································5
3.5冷卻系統和加熱系統考慮····················································5
3.6確定成形零部件的結構形式··················································5
第四章繪制結構方案草圖····························7
4.1注射量的校核······························································7
4.2鎖模力與型腔內平均壓力、注射壓力的校核····································7
4.3模具厚度與注射機閉合高度校核··············································9
4.4注射機開模行程····························································9
第五章計算與說明·································10
5.1脫模力計算·······························································10
5.1.1計算公式································································10
5.2成型零部件工作尺寸計算···················································10
5.2.1定模、動模(型腔、型芯)選用材料··········································10
5.2.2型腔側壁厚度和底版厚度確定··············································11
5.2.3型腔、型芯工作尺寸確定··················································12
5.3推桿計算·································································17
5.3.1推桿選用材料····························································17
5.3.2計算推桿長度····························································17
5.4進行關鍵零件的強度和剛度校核··············································18
5.4.1推桿的強度和剛度的校核·················································18
5.4.2型腔型腔壁厚和底板厚度校核·············································20
總結········································································21
致謝········································································22
參考文獻····································································23
1