農作物秸稈顆粒成型機的機構設計【優秀課程畢業設計含SW三維6張CAD圖紙及仿真+帶任務書+開題報告+外文翻譯】-jxsj50

農作物秸稈顆粒成型機的機構設計【優秀課程畢業設計含SW三維6張CAD圖紙及仿真+帶任務書+開題報告+外文翻譯】-jxsj50

農作物秸稈顆粒成型機的機構設計

摘  要

通常利用農作物秸稈顆粒成型技術，把那些松散細碎或者無定型的秸稈擠壓成為形狀規則且又質地緊密的成型燃料，這統稱為秸稈壓縮。當秸稈擠壓成為顆粒后，它的能量密度大幅提升，燃燒特性會較成型之前有大幅改善。秸稈批量生產的重點是有性能優越的秸稈壓縮機。首先，秸稈壓縮的產量主要由秸稈成型機的顆粒效率決定。再者，壓縮成本的增高是由成型機能耗過多造成的。因此，秸稈顆粒成型行業的首要課題是新型秸稈成型技術和設備的研究和發展。本文的設計內容為研究秸稈顆粒成型機在國內外應用的現狀。根據研究結果，仔細分析比較現有的顆粒成型機，采納不同結構的優點，再設計成型機的最佳方案。確定最佳設計方案后，對重要部件如：軸承、電動機、減速器、連接軸等進行計算并選型，再對其進行應力校核。運用Solidworks對秸稈顆粒成型機進行三維建模是本次工作的最后一步。本次設計的農作物秸稈顆粒成型機體積小，能使廢棄的資源得到合理利用并能創造經濟利益，而且操作非常簡單，能夠更多的運用到日常生活中，最后他的維護成本也是極低的。

關鍵詞 秸稈；螺旋式；結構設計；復雜性

Structure Design of Grain Forming Machine Straw

Abstract

. Usually the use of crop straw particle molding technology, those loose or broken straw or extruded into a regular shape and compact texture of the molding of fuel, which collectively referred to as straw compression. When the straw is extruded into particles, its energy density is greatly improved, and the combustion characteristics are significantly improved before molding.. First, the yield of straw compression is determined primarily by the particle efficiency of the straw molding machine.Therefore, the straw pellet molding industry's top priority is the new straw molding technology and equipment research and development. The design of this paper is to study the application status of straw granulator at home and abroad. According to the results of the study, careful analysis of the existing particle molding machine, the advantages of different structures, and then design the best molding machine. Determine the best design, the important parts such as: bearings, motors, reducer, connecting shaft, etc. to calculate and select, and then its stress check. The use of Solidworks on the straw particle molding machine for three-dimensional modeling is the last step in this work. The design of the crop straw particle molding machine small size, can make the waste of resources to be rational use and can create economic benefits, and the operation is very simple, can be more applied to daily life, and finally his maintenance costs are very low.

Keywords Straw,screw type,the structuredesign,complexity

目  錄

摘要 I

Abstract II

第1章 緒論 1

1.1 農作物秸稈顆粒成型機發展現狀 1

1.2 農作物秸稈顆粒成型機發展趨勢 2

1.3 研究意義 3

1.4 研究內容 4

第2章 秸稈顆粒成型機的結構及成型原理 5

2.1 農作物秸稈顆粒成型機的特點 5

2.2 農作物秸稈顆粒成型機設計思路 5

2.3 秸稈顆粒成型機的結構組成 6

2.4 顆粒成型機的成型原理 7

2.5 本章小結 7

第3章 秸稈顆粒成型機主要零件的設計 8

3.1 螺桿的設計 8

3.1.1 螺桿結構設計 8

3.1.2 確定螺桿的基本參數 8

3.1.3 螺桿強度校核 9

3.2 電機減速機的選型計算 9

3.2.1 電機選擇原則 10

3.2.2 電機輸出扭矩 11

3.2.3 電機功率 11

3.3 軸的設計 11

3.3.1 軸徑確定 12

3.3.2 軸的受力分析 13

3.3.3 彎扭合成強度校核 15

3.4 皮帶選型計算 15

3.4.1 折疊平型帶傳動 15

3.4.2 折疊三角帶傳動 15

3.4.3 折疊同步齒形 16

3.4.4 帶傳動的功率 17

3.4.5 強度校核 18

3.5 出料模具設計 19

3.6 軸承選型計算 20

3.7 本章小結 22

第4章 秸稈顆粒致密成型機三維建模 23

4.1 Solidworks三維建模技術 23

4.2 秸稈顆粒致密成型機三維建模 23

4.3 秸稈顆粒致密成型機 27

4.4 運動仿真 29

4.5 本章小結 30

結   論 31

致   謝 32

參考文獻 33

【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】

2.avi

3.avi

3D.stp

SW三維建模及其他

農作物秸稈顆粒成型機的機構設計任務書.doc

農作物秸稈顆粒成型機的機構設計開題報告.doc

農作物秸稈顆粒成型機的機構設計說明書正文.doc

減速器裝配圖a0.dwg

出料模具a2.dwg

封皮B5.doc

文件清單.txt

蝸輪軸a2.dwg

螺桿軸a3.dwg

裝配圖1A0.dwg

軸承蓋a3.dwg