【溫馨提示】====設計包含CAD圖紙 和 DOC文檔，均可以在線預覽，所見即所得，，dwg后綴的文件為CAD圖，超高清，可編輯，無任何水印，，充值下載得到【資源目錄】里展示的所有文件======課題帶三維，則表示文件里包含三維源文件，由于三維組成零件數量較多，為保證預覽的簡潔性，店家將三維文件夾進行了打包。三維預覽圖，均為店主電腦打開軟件進行截圖的，保證能夠打開，下載后解壓即可。======詳情可咨詢QQ：1304139763
機械工程學院
屆本科生畢業設計題目任務書
指導教師姓名
年齡
職稱
畢業院校
所學專業
題目名稱
立式行星球磨機的設計
題目類別
工程
題目來源
科研生產
擬指導的人數
題目?jī)?nèi)容及要求：（5）立式行星球磨機的設計
行星球磨機是混合、細磨、小樣制備、納米材料分散、新產品研制和小批量生產高新技術材料的必備裝置，本課題旨在設計一種實驗室用立式行星球磨機。參數如下：1、電源及功率：AC380V/550W；2、球磨罐容積：500ml×4；3、球磨罐：配四個尼龍罐（硬質合金、不銹鋼）及氧化鋯球；4、轉速： 340 r/min；5、進料粒度：≤5mm 出料粒度：0.1um
具體內容及進度：
1、課題調研：資料檢索、調研。（1周）
2、毛坯設計、工藝路線擬定。（2周）
3、工藝設計。（2周）
4、夾具設計。（2周）
5、夾具零件圖紙繪制；（2周）
6、產品設計使用說明書；（1周）
7、與課題相關的外文資料翻譯3000字。（1周）
8、其他要求：學生在教師指導下獨立完成；一組學生的技術參數或結構方案不得相同；
參考資料：
1、《工藝設計課程設計指導書》
2、《金屬切削機床夾具設計手冊》
3、《機械工藝師》雜志
4、相關專業教材
題目所涉及的知識面：機械設計、材料、工藝、電氣控制、環保
學院
審
核
意見
院長簽字： 年 月 日
注：1、題目類型：工程設計、實驗、理論計算、其他； 2、題目來源：科研生產、實驗室建設、其他。
球磨機磨損的推斷模型
摘要：球磨機，典型礦物加工業，被用于將大小分布的礦石磨成別的。磨損與影響研磨性能的鋼球電荷方面的細碎機械學的建立聯系在一起。在本研究中，球磨機磨損與研磨工作參數有關，決定使用一種數學磨損模型。這種磨損模型聯合在壓碎過程中能量的消散和填裝層的磨損區段同粘著力和磨損描述。這種模型已經被加到鋼球裝填層運動模型，球磨機磨損率的模擬實驗以及球磨機的元件磨損和它的對研磨性能的影響?，F(xiàn)有模擬結果顯示了在磨損和研磨性能之間的交互作用。更深入的研究是用工業日期確認裝填層和磨損模型的答案。1997年，加拿大采礦和冶金學會。由Elsevier Science Ltd出版。
引言
粉碎，磨碎到微粒，磨成粉都是用于該礦產加工工業的水磨程序的同義名詞。與這些過程有關聯的是金屬磨損，加拿大和美國的年度消耗鋼鐵量達300 000噸。磨損也影響著研磨性能和品質。在這一篇論文中，磨損的推斷模型的預測對減少工序磨損、保持研磨性能和品質最理想的磨損狀況的決定是必需的。
磨損和它與磨損有關機械學原理已經被廣泛的應用在[2-4]期實驗數據上，有用的模型對磨損現象的理解在[5-9]期實驗數據上，理論研究在[10-12]期實驗數據上。這篇論文的目的是根據球磨機水磨工序理論的發展而做出的磨損模型的推測。
背景
球磨機(圖1所示)是由許多相互聯系和相互作用的零件組合成的一個體系，這些零件組合起來是為了磨碎礦石。這種機械粉碎法的工序是由一些特殊的鋼球組成的球磨機的零件用來磨碎礦石的過程。同時，這些球在球磨機工作期間能夠很好地建成球磨機的填裝層的輪廓，如圖2所示。
填裝層的輪廓標志描繪為三個有典型破碎特性的區域。研磨區段是由彼此滑動球?qū)訑?shù)描述，磨碎它們之間的礦石；翻滾的區域是在低能量的沖擊下對鋼球相互的滾動和磨碎礦石的描述。擊碎的區域是在高能量的沖擊下對鋼球的飛行和擊碎礦石的描述。
填裝層的輪廓的形成是直接地依靠存在填裝層和球磨機滾筒壁之間的摩擦力。通過用不同的襯板輪廓，摩擦力也可改變由此而生的影響球磨機輪廓的形式。
輪廓運動模型
如上述所提。球磨機磨損是能量轉移的作用在襯板和球輪廓之間以及在二個碰撞的球之間。因此，塑造輪廓運動模型是預測球磨機磨損和對研磨的影響的作用第一步。
模型的發展開始以單個的球的運動為對象(如圖4)。如所描述由Mclvor和Powell [15、16]，在球磨機中單個球飛行的問題是由轉動速度，滾筒半徑，靜摩擦因子和輪廓的角度決定：
(1)
無論如何，Hukki [17] 提及球輪廓的運動不是全部依靠一個的單點飛行如假設上述等式。它也是依靠描述球輪廓和襯板類型相互聯系的有效的摩擦因子是否和我的差不多。
所以，如果我們描述動力傳遞損耗在二球?qū)訑?shù)之間作為靜態和運動摩擦因子[17]之間的]一個關系;
(2)
旋轉的動力傳遞損耗速度為：
(3)
使用這個結果，我們可以區分球飛行和點穩定的動力傳遞損耗之間如下：
1. 飛行的問題 (μ≥1.0)
(4)
2. 穩定的動力傳遞損耗問題(μ<1.0)
(5)
有效的摩擦因子被定義為;
(6)
用這些關系與被描述的那些一起[18-20]和應用于他們描述離散的球填充層的質點系，它變得可能模仿球填充運動(如圖5所示)。
因而被定義為填充層運動，我們?cè)诟鞣N各樣的粉碎區域在填充外形可以通過確定被消耗的運動和分布能量(如圖2)，使用下式[18-21]：
(7)
(8)
(9)
在球磨機中這種能量輪廓(如圖6)現在被確定為Hardinge磨機(如圖1)。這個輪廓運動模型確定顯示能量怎么在研磨，擊碎和翻滾時被消耗后分布作為磨機轉動速度、滾筒直徑、填充層和襯板表示法功能。
磨損率的估計
如前面所提到，在球磨機的球輪廓的運動外形有三個粉碎區域。雖然有別的磨損機械學的存在，只有膠粘劑和磨蝕是與這些粉碎區域有聯系。同翻筋斗和擊碎區域聯系在一起，當球在這些區域碰撞，當黏著性磨損聯系到研磨區域時，球滑過另一個球或越過另一個球。這些機制可以被表達，根據在[23-24]磨損的能量率而做黏著性磨損
(10)
腐蝕磨損
(11)
運用這些磨損模型于球磨機的情況，我們可以得出：
(12)
(13)
(14)
比較最初和最后的襯板磨損外形，襯板磨損率可以被估計使用：
(15)
我們可以通過比較公式（15）和公式(12)確定磨蝕因素，因而得到：
(16)
進一步，使用公式（13）和公式（14）以及(16)的結果，我們可以盡可能地確定黏著力的大?。?
(17)
以磨蝕因素并且為特定球磨機操作的上下文確定的黏附力可能性，現在我們從這個上下文可以確定球磨機的磨損率的影響是怎么改變的。保持和P為常數，變化的參量例如磨房轉動速度和輪廓邊界，我們可以推出對球磨機磨損率[24的]有關的變動。然而，推測球磨機磨損率是有限的，在球磨機研磨時，考慮到我們的確定球的磨損的影響的目標時的表現。
襯板磨損
在球磨機研磨的表現取決于主要能量怎樣被分布在球輪廓外形的各種各樣的粉碎區域。
如被提及，輪廓外形的形式，和每個粉碎區域的重要特性，是直接地依靠存在球輪廓和球磨機桶壁之間的摩擦力。
不同的襯板輪廓類型(圖3) 在球輪廓和球磨機筒壁以及研磨的表現之間影響這中摩擦力。由于有特定的上下文，所以使用被認為優選的襯板類型的輪廓是可能的。然而，以時間，球磨機磨損將修改最初的襯板輪廓外形和隨后碾碎研磨。在球磨機輪廓的力量下塑造運動形式成為推斷球磨機磨損和它對研磨性能的影響的下一個步驟。
在球磨機運轉期間，整個輪廓大廳由重心和離心力然后施加力場組成襯板輪廓（圖7）[23-25]。
用這種描述，平均的組成力可以被確定作為展示在圖8中；
(i)平均組成的離心力
(18)
(ii)平均組成的重力
(19)
進一步，在球磨機襯板上面作為球磨機輪廓，球磨機輪廓的襯板部分的位移會產生一個壓縮力（圖9）。 這力量被定義如下：
(20)
這里
通常表示為：
(21)
在襯板表面總的平均作用力可以成為：
(22)
襯板磨損，作為球磨機球輪廓?jiǎng)?chuàng)造的力場的位置和強度功能以及磨蝕因素，成為：
(23)
那里
(24)
指出在襯板的滑動速度由早先的公式（2）重新整理。
在襯板離散化到的區別，定時乘，這種仿真算法可以被開發之后成為[23-25]，包括襯板齒廓磨損的模擬實驗。
舉例來說，圖10中圖解的一種波形襯板的輪廓磨損的模擬實驗和在圖11中現實的襯板的輪廓磨損差不多。
球磨機磨損和研磨性能
雖然工業上的研究需要更多這樣的磨損模型，但是想象出一種彈性襯板的進化磨損的推斷模型是有可能的。當然，這將計算怎樣的磨損影響對研磨性能的決定，這里解釋為在顆粒測定的生產能力的變化。由圖1.的Hardinge情況得，消逝在傾斜的襯板的現象由這里轉化為模擬如圖12所示。
進一步，該圖6的能量率曲線是怎么隨這種襯板磨損而變化的，推斷球磨機的輸出同輸入的變化一樣，是有可能的。從表格1可以看出，使用一種已經被開發的破碎模型，可以解釋襯板的壽命期限是有可能的。這里，球磨機生產能力將提高而襯板磨損下降。
與這種現象相聯系，球磨機能源消耗的減少如所顯示。這兩種現象說明最佳化球磨機的性能作為一種推斷磨損影響的函數是可能的。
表1.球磨機的輸出量作為襯板曲線的一個函數。
顆粒大小
(μm)
最初通
過量%
1/2通過
量 %
最后通
過量%
74
100
150
300
830
1170
1650
58.08
68.25
78.54
92.12
99.45
99.96
100.00
58.25
68.44
78.68
92.15
99.45
99.96
100.00
60.13
70.38
80.25
93.96
99.61
99.97
100.00
討論
在結束這篇論文之前應該對球磨機填裝層運動、襯板磨損和球磨機輸出的產品做幾點評論。
如所示，球磨機的填裝層運動依靠許多物理和操作因素；它也依靠礦漿的流變特性。當然這些礦漿的流變特性是百分比固體的作用并且礦石的性質。在填裝層運動的模型中，這些因素的影響被包括在（2）滑動速度的關系中，如所描述的靜態和動摩擦因素。摩擦因素的變化，如礦漿的流變特性的一個可能的變化造成的，可以增加或減少在鋼球?qū)又g和襯板磨損之間的相當數量的動力傳遞損耗。
在球磨機的磨損模型和兩種磨損機械學中，它只是一種假設，球磨機不是空轉的或者運轉狀況不直接地把鋼球放到球磨機襯板里。在這樣的情況下，襯板磨損同磨損機械學一樣（表面，破裂，磨損），都增加了襯板的磨損率。
球磨機產品的變化的重要性與襯板的磨損有關，是從屬與一種特殊的礦石的破碎特性。同樣地，檢驗使用的工業數據為了確定這個模型精確度是必要的。然而，假設，整體模型的一個充分檢驗是可能的，這里被提出的初步結果表示，考慮使用這個模型為球磨機優化作為能源消耗和球磨機襯板磨損功能變得可能。
結論
這篇論文根據球磨機的一個理論描述提出了一個有預測性的襯板磨損模型。當包括一個簡單的膠粘劑和磨損模型的應用對一個復雜的鋼球填裝層模型時，不僅能確定必要的磨損參數，而且推斷襯板和研磨性能是可能的。
無論如何，進一步的研究對模型的檢驗和參數確定是必要的。盡管這是必要的，但在將來，球磨機在設計和操作方面的優化也有了可能性。
鳴謝--本文的出版物由加拿大研究經費自然和工程研究委員會使成為可能。
PREDICTIVE MODEL FOR BALL MILL WEAR
Abstract-ball mills, characteristic of the mineral processing industry, are used to reduce ore from one size distribution to another. Wear is associated with comminution mechanisms found in the ball charge which in turn affects grinding performance. In this work, ball mill wear, as a function of mill operating variables, is determined using a mathematical wear model. The wear model incorporates the energy dissipated in crushing, tumbling and grinding zones of the charge profile with adhesive and abrasive wear descriptions. This model has been added to a ball charge motion model allowing the simulation of mill wear rates as well as ball mill element wear and its affect on grinding performance. Simulation results presented show the interaction between wear and grinding performance. Further work is necessary to validate charge and wear model results using industrial date.1997 Canadian Institute of Mining and Metallurgy. Published by Elsevier Science Ltd.
INTRODUCTION
To comminute, to reduce to minute particles, to pulverize, are all synonyms of grinding processes used in the mineral processing industry. Associated with these processes is metal wear which in Canada and the United States represents an annual consumption of some 300 000 tons of iron and steel [1]. Wear also affects grinding performance and quality. In such a context, predictive wear models become a necessity to determine optimal grinding conditions that reduce process wear while maintaining grinding performance and quality.
Wear and its mechanisms related to grinding has been studied extensively using experimental data [2-4], models useful to understanding of wear phenomena [5-9] and theoretical studies [10-12].The goal of this paper is the presentation of a predictive wear model based on a theoretical development for one such grinding process, the ball mill.
BACKGROUND
The ball mill (Fig.1) is a system composed of a number of interrelated and interactive elements that work together in order to grind a given ore. This comminution process is achieved by the individual balls which constitute the actual ball mill element that brings about ore breakage. Together, these balls form the mill ball charge which, during ball mill operation, typically has a charge profile as found in Fig.2.
Note that the charge profile shows three zones that are characterized by the type of breakage occurring there. The grinding zone is described by ball layers sliding over one another, breaking the material trapped between them; the tumbling zone is described by balls rolling over one another and breaking the material in low-energy impact; the crushing zone is described by balls in flight re-entering the ball charge and crushing the material in high-energy impact.
The form of the charge profile is directly dependant on the friction force existing between the charge and the ball mill wall. By the use of different liner profile (Fig.3), the friction force can be changed subsequently affecting the form of the mill charge as well.
Charge motion model
As mentioned. Mill wear is a function of the energy transferred between liner and ball charge as well as between two colliding balls. Therefore, modelling charge motion is a first step to predicting mill wear and its effect on grinding.
Model development starts with defining single ball motion (Fig.4). As described by Mclvor and Powell [15、16], the point of flight of a single ball in a ball mill can be determined as a function of rotation speed, mill radius, static friction factor and the liner lifer angle:
(1)
However, Hukki [17] mentions that ball charge motion is not entirely dependant on a single point of flight as assumed with the above equation. It is also dependant on whether the effective friction factor describing the interrelationship between ball charge and type of liner used is greater or less than I.
Therefore, if we describe slippage between two ball layers as a relationship between static and kinetic friction factors [17];
(2)
Rotational slippage speed becomes:
(3)
Using this result, we can differentiate between ball flight and the point of stable slippage as:
1. point of flight (μ≥1.0)
(4)
2. point of stable slippage (μ<1.0)
(5)
Where the effective friction factor is defined as;
(6)
Using these relationships along with those described in [18-20] and applying them to a system of particles that describe a discretized ball charge, it becomes possible to simulate ball charge motion (Fig. 5).
Having thus defined charge motion, we can further this development by determining energy consumed and distributed in the various comminution zones on the charge profile (Fig, 2) using the following equations [18, 21]:
(7)
(8)
(9)
The energy profile (Fig. 6) in a ball mill can now be determined as for the Hardinge mill of Fig. 1. Note that this charge motion model determines how energy is consumed and then distributed in grinding, crushing and tumbling as a function of mill rotation speed, mill diameter, ball charge and liner representation.
Wear rate estimation
As mentioned earlier, there are three comminution zones in the ball charge motion profile. Although other wear mechanisms exist, only adhesive and abrasive wear are associated here with these comminution zones. Adhesive wear is associated with the tumbling and crushing zone as balls in these zones collide while abrasive wear is associated to the grinding zone where balls slide pass one another or over the null liner. These mechanisms can be expressed in terms of energy rate used in wear as [23-24]:adhesive wear
(10)
abrasive wear
(11)
Applying these wear models to the ball mill case, we write;
(12)
(13)
(14)
Comparing initial and final liner wear profiles, liner wear rate can be estimated using:
(15)
We can determine the abrasion factor by equating eqn (15) with eqn (12), thus getting:
(16)
Further, using eqn (13) and eqn (14) with the result of eqn(16)，we can determine the adhesion probability:
(17)
With the abrasion factor and adhesion probability P determined for a given mill operating context, we can now determine how changes from this context affect mill wear rates. Keeping and P constant, and varying parameters such as mill rotation speed and charge column, we can predict the associated changes to mill wear rates [24]. However, predicting wear rates is only of limited use when considering our goal of determining the effect of wear on ball mill grinding performance.
Liner wear
Grinding performance in a ball mill is determined primarily by how energy is distributed into the various comminution zone found in the ball charge profile. As mentioned, the form of the charge profile, and consequently the importance of each comminution zone, is directly dependant on the friction force existing between the ball charge and the mill wall.
Different liner types (Fig.3) affect this friction force between the ball charge and the mill wall and the mill grinding performance. For a given grinding context, it is possible to use a liner type that is considered optimal. However, with time, mill wear will modify the initial liner profile and subsequently mill grinding. Modelling the forces acting on the mill liners becomes the next step to predicting mill wear and its effect on grinding.
During mill operation, the hall charge exerts a force field composed of gravitational and centrifugal components on the mil liner (Fig.7) [23, 25].
Using this description, normal force component can be determined as show in Fig.8, giving:
(i) centrifugal normal component
(18)
(ii) gravitational normal component
(19)
Further, as the ball charge slip over the mill liner, a compression force is created with the local displacement of the mill charge by the liner (Fig.9). This force is defined as:
(20)
Where
The normal compression component as:
(21)
The total normal force acting on the liner surface becomes:
(22)
Liner wear, as a function of the position and intensity of the force field created by the ball charge as well as the abrasion factor 0, become:
(23)
Where
(24)
Note that slippage speed on the liner is defined previously by rearrangement of eqn (2).
After liner discretization into differences ，and time into , a simulation algorithm can be developed [23, 25] which allows liner profile wear simulation.
As an example, Fig. 10 illustrates a wave liner profile wear simulation which is comparable to the real liner profile wear presented in Fig.11.
MILL WEAR AND GRINDING PERFORMANCE
Even though industrial studies are needed to further validate these wear models, it is possible envisage the prediction of wear evolution of a given liner type. This, of course, wou1d allow the determination of how wear affects grinding performance here defined as variations in output granulometry. For the Hardinge case of Fig.1, this translates into simulating the effect of wear on the bevel liner as shown in Fig.12.
Further, simulating how the energy rate profile of Fig.6 changes with this liner wear, it is possible to predict the changes in mill output granulometry for the same input granulometry. Table 1 shows how, using a breakage model developed in [22,23], it is possible to illustrate output variation over the life period of the liner. Here, mill output becomes finer with liner wear.
Associated with this phenomenon, mill energy consumption decreases as shown in Fig.13. Both these phenomena illustrate the possibility of optimizing ball mill performance as a function of the predetermined effect of wear.
Table 1. Ball mill output granulometries as a function of worn liner profile
Particle size
(μm)
Initial %
passing
1/2 life %
passing
Final %
passing
74
100
150
300
830
1170
1650
58.08
68.25
78.54
92.12
99.45
99.96
100.00
58.25
68.44
78.68
92.15
99.45
99.96
100.00
60.13
70.38
80.25
93.96
99.61
99.97
100.00
DISCUSSION
Before concluding this work a few remarks should be made concerning charge motion, liner wear and associated mill output product.
As shown, ba11 charge motion is dependant on a number of physical and operating factors; it is also dependant on the rheological characteristics of a given slurry. These rheological characteristics are of course a function of percentage solids as well as ore properties. In the model of charge motion the effect of these factors is included in the relationship (2) for slippage speed as escribed using static and kineticd friction factors. A variation in the friction
factors, as caused by a possible change in rheological characteristics of a given slurry, can increase or decrease the amount of slippage between ball layers and thus increase or decrease liner wear.
In modelling ball mill wear with only two wear mechanisms, it is assumed that a mill is not run empty or that operating conditions do not send mill balls crashing directly into the mill liner. Under such conditions, liner wear increases considerably with added wear mechanisms (surface fatigue, fracture, cratering) gaining importance.
The importance of ball mill product variations as a function of liner wear is dependant on the breakage characteristics of a particular ore. As such, validation using industrial data is necessary in order to determine the precision of this model. However, assuming that an adequate validation of the whole model is possible, the preliminary results presented here show that it becomes possible to consider using this model for ball mill optimization as a function of energy consumption and mill wear.
CONCLUSIONS
This work has presented a predictive wear model based on a theoretical description of the ball mill. While covering the application of a simple adhesive and abrasive wear model to a complex ball charge model, it was possible not only to identify the required wear parameters, but also to predict liner wear and grinding performance.
However, further work is required particularly in model validation and parameter identification. Notwithstanding this need, ball mill optimization, in design and operation, becomes a future possibility.
Acknowledgement--The publication of this paper has been made possible by a Natural and Engineering Research Council of Canada research grant.