礦用半掛車分動器設計【含9張CAD圖紙+PDF圖】

礦用半掛車分動器設計【含9張CAD圖紙+PDF圖】,含9張CAD圖紙+PDF圖,半掛車,分動器,設計,CAD,圖紙,PDF 礦用半掛車分動器設計 摘 要 本設計主要了解礦用半掛車，以及礦用半掛車的載重，常見礦用半掛車的分動器基本原理和基本結構的型式,礦用半掛車屬于非公路運輸用的重型和超重型自卸掛車主要承擔大型礦山、工程等運輸任務，工程方面，比一般載重車更耐用，工作環境惡劣、負載重、勞動強度高。分動器的功用就是將分動器輸出的動力分配到各驅動橋，并且進一步增大扭矩。分動器也是一個齒輪傳動系統，它單獨固定在車架上，其輸入軸與分動器的輸出軸用萬向傳動裝置連接，分動器的輸出軸有若干根，分別經萬向傳動裝置與各驅動橋相連。本設計主要說明了分動器的設計計算過程。設計部分較詳細的敘述了分動器的設計過程，選擇結構方案、主要參數、齒輪設計、軸設計、計算校核、其他結構部件的設計。 關鍵詞：礦用半掛車分動器；齒輪；軸 5 Design of Power Transfer Case for the mine Semi-trailer Abstract This design mainly know mine semi-trailer, and mine semi-trailer truck, common mining semi-trailer transfer basic principle and basic structure of the model, mining semi-trailer belongs to the highway transportation of heavy and super-heavy dump trailer mainly bear the transportation tasks such as large-scale mining, engineering, engineering, the truck is more durable than normal, work environment bad, negative load, high labor intensity. Transfer function is to transfer the output of the power allocated to each drive axle, and further increase torque. Transfer box is a gear transmission system, it separately fixed on the frame, its input shaft connected to the transfer box output shaft with a universal transmission device, there are a few root transfer box output shaft, respectively by the universal driving device connected with the drive axle. This design mainly illustrates the design and calculation of transfer process. Design part in detail describes the transfer of the design process, choose the structure scheme, the main parameter, design of gear, shaft structure design, calculation and checking, other parts of the design Keywords: mine semi-trailer; gear;shaft 目 錄 1緒論…………………………………………………………………………………1 1.1概述.....................................................................................................................…1 1.2分動器簡介..................…..…………………………………………………….....1 1.2.1帶軸間差速器的分動器…………....................................................................1 1.2.2不帶軸間差速器的分動器…………................................................................2 1.2.3裝有超越離合器的分動器…………................................................................2 1.3分動器的構造及原理....................................................................................…2 1.4分動器的輪型..................…..………………………………..……………...…....2 1.4.1分時四驅............................................................................................................2 1.4.2全時四驅............................................................................................................2 1.4.3適時驅動............................................................................................................3 1.5分動器結構方案的選擇.........................................................................................3 1.6完成本課題的工作方案及進度計劃（按周次填寫）…..……………………...5 1.7畢業設計的工作量要求…..………………………………...……………………5 2分動器主要參數的選擇………………………………………………………6 2.1檔數及傳動比……………………………………………………………………6 2.2中心距.................…………………………………………………………… …7 2.3齒輪參數.................…………………………………………………… ……7 2.3.1齒輪模數...........................................................................................................7 2.3.2齒形、壓力角、螺旋角β和齒寬................................. .............................8 2.4高低檔傳動比及其齒數的確定……… ………………………………………9 2.4.1確定抵擋齒輪的齒數........................................................................................9 2.4.2確定高擋齒輪的齒數........................................................................................9 3分動器齒輪強度計算及材料選擇…………………………………………11 3.1齒輪失效形式與原因…………………………………………………………11 3.2齒輪強度計算與校核…………………………………………………………11 3.2.1斜齒輪彎曲應力..............................................................................................11 3.2.2齒輪接觸應力..................................................................................................12 4軸的計算與校核………………………………………………………………14 4.1軸的失效形式及設計準則……………………………………………………14 4.2軸的計算..............……………………………………………………………14 4.2.1輸入軸的初選及校核......................................................................................14 4.2.2輸出軸的初選及校核......................................................................................15 4.3分動器軸承的選擇………………………………………………...............……15 4.3.1軸的結構設計..................................................................................................15 4.4鍵的計算...............................................................................................................18 5同步器……………………………………………………………………………20 5.1同步器的結構類型…………………………………………………………20 5.2鎖環式同步器的工作原理……………………………………………………20 5.3慣性鎖止式同步器的主要結構參數…………………………………………22 5.3.1摩擦錐面的半錐角和摩擦系數f………………………………………....22 5.3.2摩擦錐面的平均半徑和同步錐環的鏡像厚度.....................................22 5.3.3摩擦錐面的工作面寬..................................................................................22 5.3.4鎖止角β...........................................................................................................23 5.3.5同步時間與軸向推力.............................................................................23 5.3.6同步器摩擦副的材料......................................................................................23 6工藝分析................................................................................................................24 6.1殼體加工工藝.......................................................................................................24 6.2撥叉加工工藝.......................................................................................................25 6.3齒輪加工工藝.......................................................................................................25 6.4軸的加工工藝.......................................................................................................25 6.5總成的裝配...........................................................................................................26 7總結…………………………………………………………………......…………28 參考文獻………………………………………………………………………...…29 致謝……………………………………………………………………………….....30 畢業設計（論文）知識產權聲明…………………………………………….....31 畢業設計（論文）獨創性聲明………………………………………………….....….32 1 緒論 1.1概述 本課題主要研究礦用半掛車分動器設計，在多軸驅動的汽車上，為了將變速器輸出的動力分配到各驅動橋，通常裝有分動器。礦用半掛車的牽引車是在礦車底盤基礎上改進設計的雙后橋驅動結構，針對橋驅動結構設計中的關鍵設備—專用分動器，通過分析雙后橋驅動原理以及分動器的原理和功能，根據動力分配、底盤結構、傳遞扭矩及傳動方式的要求，確定出分動器的設計方案和整體結構特點[1]。在近百年中，汽車設計技術也經歷了由經驗設計發展到以科