微濾機樣機虛擬設計-污水處理設備【三維SW模型】【全套含CAD圖紙】
喜歡就充值下載吧,,資源目錄下展示的全都有,,下載后全都有,dwg格式的為CAD圖紙,有疑問咨詢QQ:414951605 或1304139763
任務書
課題名稱
微濾機樣機虛擬設計
畢業(yè)設計(論文)的主要內容及要求:
1. 查閱與課題相關文獻資料10篇以上,其中英文資料2篇以上,英文資料
翻譯5000漢字以上;
2.污水處理設備----微濾機的作用與功能;
3.初步確定設計方案;
4.初步繪制微濾機各部分結構圖,并分析其結構合理性;
5.對主要零部件結構進行強度,剛度分析,確定各部分尺寸;
6.利用三維軟件進行零件三維建模及虛擬裝配;
7.圖紙要求:CAD圖以及手工繪圖折合A0圖2.5張以上,并且至少手工繪制一張裝配圖;
8.設計說明書一份(1萬字以上,要求電腦打印,說明書組成包括畢業(yè)設計
任務書、中外文摘要及關鍵詞、目錄、正文、主要參考文獻、致謝和附錄等。
指導教師簽字:
Drum microfiltration machine?
CN 102600657 B
摘要??
The present invention discloses a drum microfiltration, its micro filtration cartridge assembly located settling tank (24), filtered settling tank (24) is provided on top of the drive motor (1), the cartridge assembly includes micro features axis (6) and the filter cylinder group (5), filtered roller set (5) of each roller barrel support wire (22), features a shaft (6) is fixed in the center of the filter cylinder group (5) around the axis function ( around 6) is provided between the drive motor (1) and the filter drum set (5) Transmission (2), functional shaft (6) inside a hollow in the functional axis (6) and the filter cartridge group (5 ) drain assembly disposed between the distribution function of the shaft (6), drain assembly and the filter cartridge group (5) In contrast, the other side features the shaft (6) with a high-pressure inlet / outlet pipe (7), the high-pressure feed / outlet pipe (7) and functional shaft (6) connected at the bottom of the micro-cartridge assembly is provided scum (8).
說明??
A drum microfiltration
Technical Field
[0001] The present invention relates to a drum microfiltration.
Background
[0002] The present rotary microfiltration prevalent complex structure, installation, maintenance, maintenance is not easy, resulting in unnecessary waste, it has the following drawbacks: 1, the installation 16~20 piece turntable on the turntable microfiltration, each wheel has 6 ~ 8 blocks divided, complex structure, and the installation of trouble on both sides of each piece rotary filter, and supplies more appropriate cost is high; 2, on each rotary microfiltration unit to be equipped with a plurality of suction device, flushing device and a plurality of electronic control devices, as the process of increasing the amount of water, which means a corresponding number will be doubled, so the failure rate increased accordingly; 3, rotary microfiltration filter during use, easy to plug, require frequent Start high-pressure washing or adsorption unit, high-pressure washing or adsorption to shorten the interval retentate to ensure clean filter, thus ensuring flow capacity; 4, rotary microfiltration larger area.
DISCLOSURE
[0003] The present invention discloses a drum microfiltration, it is not only small footprint, easy installation and maintenance simple, reliable operation of microfiltration.
[0004] The present invention employs the following technical scheme: a drum microfiltration unit, characterized in that it includes a lateral component with micro cartridge, micro filtration cartridge assembly located in the settling tank, the top of the settling tank provided with the filter driver motor, the micro-cartridge assembly includes features shaft and filter drum set, drum set filter cartridge for each roller support network function shaft is fixed in the center, around the filter drum group function around the shaft, drive motor and Transmission is provided between the filter drum set, the drive motor to rotate the filter drum group led by the transmission system, the internal functions of a hollow shaft, the shaft between the functional group and filter cartridge components distributed drainage, drainage assembly is disposed in the functional axis drainage and filter cartridge assembly group opposed to the other end of the function with a high pressure into the shaft / outlet pipe, high-pressure inlet / outlet pipe connected with the function of the shaft, at the bottom of the cartridge assembly is provided with slag micro tube.
The drive system [0005] is set to gear transmission, gear transmission system includes a drive sprocket, driven sprocket
1, and a pinion gear set, the number of filter drum drive gear gear set and the number of groups corresponding to the filter drum, the drive sprocket fixed to the output shaft I of the drive motor, the driven sprocket shaft I provided at one end of the function end surface, on the side of the driven sprocket fixed to the drive sprocket I I, I drive gear and the driven sprocket disposed concentrically, each drive gear is located in the filter drum gear set and each roller group driving motor phase adjacent end face of one end, each transmission gear is meshed with the drive gear, the drive sprocket through the chain I I I of the driven sprocket drivingly connected to the drive motor passes through a drive sprocket, driven sprocket 1, the active Each transmission gear drive gears, each drive gear rotates the filter drum.?Said transmission gear set including a transmission gear, transmission gear and transmission gear II III, filtration drum group includes three filter drum, drum filter settings equilateral triangle arrangement, the driving gear 1, gear II and III, respectively, transmission gear set filter drum and the adjacent end face of one end of the driving motor of the three.?The transmission system is set to complete chain drive, chain drive system includes a drive sprocket entirely and drive sprocket group II, II fixed sprocket drive motor output shaft, each drive sprocket drive sprocket group Located in the filter drum set for each cylinder and the adjacent end face of one end of the drive motor, the drive sprocket II II through the chain and sprocket drive each drive connected to the drive motor through the drive sprocket II drive each drive sprocket is rotated, each a drive sprocket driven by filtering each roller rotating drum group.?The group includes a drive sprocket and a transmission sprocket, transmission sprocket drive sprocket II and III, the filter drum group includes three filter drum, three drum filters equilateral triangle set arrangement, drive sprocket, drive sprocket and drive sprocket II III three rollers are disposed adjacent to one end of the drive motor end surface.?When microfiltration with external water, the drainage component is set to the suction tube, one end of the suction tube is disposed within the multi-function and multi-function axle shaft communicates with a port at the other end of the bristles located between pumping and filtration drum straw group.?When microfiltration using internal water, drainage assembly set for the high-pressure washing tube, one end of the high-pressure washing tube provided in the multi-function and multi-function axle shaft communicates with a port at the other end of the bristles located pressure washing the filter between the tube and drum group.?Scum of the lower portion of the distribution of a number of the siphon hole.?The filter drum bearing surface with a network filter.?The precipitate was filtered with the tank top electrical control system, the input terminal is connected to the electrical control system level monitoring device, the monitoring device extends into filtered liquid sedimentation tanks, electrical control system connected to the output terminal of the drive motor.
[0006] The present invention has the following beneficial effects: the present invention, the filter drum filter drum group equilateral triangle installation, so the overall structure is compact, small footprint, simple structure, low cost of equipment, installation and maintenance is very convenient and flexible, filtration drum to support network, support wire surface with a filter, so you can quickly, the most likely to entrap impurities in the water.?The bottom of the cartridge assembly of the present invention has a micro scum, scum of the lower portion of the distribution of a number of siphon holes in the bottom of the water will precipitate impurities sucked, discharged into the sewers outside the pool, in front of the sewage flows final treatment processes, recycling, so take advantage of automatic slag siphon phenomenon, no external power.?Level monitoring device of the present invention, the difference between pool water level is measured, and the signal is transmitted to the electrical control system, electrical control system sends commands starts the drive motor and high-pressure washing device, so in order to achieve unattended automatic microfiltration, use convenience.
Brief Description
[0007] FIG. 1 is a schematic view of the invention is in the structure of the water when outside.
[0008] FIG. 2 is a schematic diagram Function distribution shaft and filtered water in the outer cylinder.
[0009] FIG. 3 transmission system of the present invention to gear transmission structure diagram.
[0010] FIG. 4 for the complete drive system of the present invention is not intended to structure the chain drive system.
Schematic diagram when the water is in [0011] FIG. 5 of the present invention.
[0012] FIG. 6 is a schematic view of the invention the distribution function of the filter drum axis within the water in.
DETAILED DESCRIPTION
[0013] In Figures 1 and 2, the present invention provides a drum microfiltration, when the outside water microfiltration machine, which includes a lateral cartridge assembly with a micro, micro filter cartridge assembly is located settling tank 24 The precipitate was filtered at the top of tank 24 is provided with a drive motor, the precipitate was filtered at the top of tank 24 is provided with an electrical control system 4, the input terminal 4 is electrically connected to the control system level monitoring means 3, the liquid level monitoring means 3 extends into The precipitate was filtered tank 24, an electrical control system output terminal I connected with the driving motor 4, the cartridge assembly includes a micro filtration roller set 5 and 6, the filter drum roller set 5 of each cylinder shaft supporting network functions 22, the filter surface of the support cylinder 22 has a mesh filter 9, the shaft 6 is fixed at the center of the function, set the filter drum 5 around the shaft 6 around the function, transmission 2 is provided between the drive motor and the filter drum group I 5, I was filtered through a rotational driving motor 2 to drive transmission roller set 5, the internal functions of a hollow shaft 6, between the shaft 6 and the functional group of the filter cartridge 5 distribution drainage assembly, the drainage assembly to the suction tube 23 one end of the suction tube 23 is provided on the shaft 6 and the multi-purpose multi-function communication shaft 6, the port at the other end is provided with bristles 20, the bristles 20 is located between the suction pipe 23 and suction filtered roller set 5, the drain assembly set functionally shaft 6, drain assembly and the filter cartridge 5 group opposed to the other end of the function with a high pressure into the shaft 6 / outlet pipe 7, the high-pressure inlet / outlet pipe 7 and the functions connected shaft 6, in the micro-cartridge assembly bottom features slagging tube 8, the lower scum 8 distribution has several siphon holes in Figures 5 and 6, when the microfiltration water use within the present invention includes a lateral with a micro cartridge assembly, micro filtration cartridge assembly is located in the settling tank 24, the precipitate was filtered top of tank 24 is provided with a drive motor I, the cartridge assembly includes micro features drum shaft 6 and the filter group 5, the filter drum roller set 5 of each cylinder a support member for the mesh filter 22 ,, surface of the support cylinder 22 has a mesh filter 9, the shaft 6 is fixed at the center of the function, set the filter drum 5 around the shaft 6 around the function, I drive between the motor and the filter 5 disposed roller set There are 2 transmission, drive motor rotation I roller set 5 2 driven by transmission filters, internal function of the shaft 6 is hollow shaft 6 between the functional group and filter cartridge assembly 5 distributed drainage, drainage assembly is disposed in the functional axis 6, drain assembly and the filter cartridge 5 group opposed to the other end of the function with a high pressure into the shaft 6 / outlet pipe 7, the high-pressure inlet / outlet pipe 7 and the functions connected shaft 6, at the bottom of the cartridge assembly is provided with micro slagging tube 8, the lower scum 8 distribution has several siphon hole, drain pipe assembly 26 is set to high-pressure washing, pressure washing 6 multifunctional shaft 6 and the inner end of the tube 26 is provided in communication in the multi-axis, the other end at the port with a bristle 20, bristle 20 is located between the high-pressure wash pipe 26 and the filter drum group 5, in Figure 3, the transmission system 2 of the present invention is set gear transmission, gear transmission system including the drive sprocket I 10, from Fixed sprocket I 14, the number of filter drum drive gear 15 and the drive gear, drive gear gear set and the number of the filter corresponding roller set 5, the drive sprocket is fixed I 10 I output shaft of the driving motor, a driven I 14 set in function sprocket shaft 6 - end face side, on the side of the driven sprocket I 14 is fixed to the drive sprocket I 10, the drive gear 10 and the driven sprocket I 14 is concentrically disposed transmission gear set including transmission gear I 12, transmission gear and transmission gear II 13 III 16, filtration roller set 5 consists of three filter drum, drum filter settings equilateral triangle arrangement, transmission gear I 12, transmission gear and transmission gear III16 II 13 are provided at three a filter drum drive motor I adjacent end face of one end of each of the transmission gear is meshed with the drive gear 15, the drive sprocket through the chain I 11 I 10 and I 14 were driven sprocket drive connected, the drive motor I turn By sprocket I 10, driven sprocket I 14, the pinion 15 driven each drive gear, each gear drive filter drum rotates, in Figure 4, the transmission system of the present invention will also be set to complete chain transmission, complete chain drive system including the drive sprocket and drive sprocket group II 25, the drive sprocket II 25 I secured the drive motor output shaft, and a transmission drive sprocket set includes sprockets I 17, the drive sprocket II 18 and the drive sprocket III 19, filtration roller set 5 consists of three filter drum, three drum filters equilateral triangle set arrangement, drive sprocket I 17, drive sprocket and drive sprocket III19 II 18 are provided at three a roller driving motor I adjacent end face of one end of the drive sprocket II 25 II 21 by a chain and sprocket drive each drive connection, I rotated by the drive motor sprocket driven by each drive sprocket II 25 per a drive sprocket driven by the filter drum set for each rotation of the drum 5.
權利要求(10)??
A drum microfiltration, characterized in that it includes a lateral component with micro cartridge, micro filtration cartridge assembly located settling tank (24), filtered settling tank (24) is provided on top of the drive motor (1 ), said cartridge assembly including micro function shaft (6) and the filter cylinder group (5), filtered roller set (5) for each cylinder barrel is supported by the network (22), features a shaft (6) is fixed in Centre, filtered roller set (5) around the peripheral function shaft (6), filtered roller set (5) comprises three filter cylinders, three cylinders filtration equilateral triangle set are arranged, a drive motor (I) and the filter drum group with a transmission system (2), the drive motor (I) (5) passes between transmission system (2) driven by filtration roller set (5) is rotated, the internal functions of the shaft (6) is a hollow in the functional axis (6) between the filter cartridge set (5) distribution and drainage components, drain assembly is disposed in the functional axis (6), drainage and filter cartridge assembly group (5) In contrast, the other side features the shaft (6) with a high-pressure feed / outlet pipe (7), the high-pressure inlet / outlet pipe (7) and functional shaft (6) connected at the bottom of the micro-cartridge assembly is provided scum (8).
The drum microfiltration 1, characterized in that said transmission system (2) is set to gear transmission, gear transmission system, including the claims of the drive sprocket I (10), a driven sprocket I (14 ), pinion (15) and a transmission gear, gear transmission gear set number of filter roller set (5) of the filter corresponding to the number of cylinders, the drive sprocket I (10) fixed to the drive motor (I) of the output shaft On the driven sprocket I (14) set in the function shaft (6) - the end of the end surface, on the side of the driven sprocket I (14) is fixed to the drive sprocket I (10), the drive gear (10) and from sprocket I (14) disposed concentrically, each drive gear gear set located in the filter cylinder group (5) with a drive motor for each cylinder (I) of the adjacent end face of one end, each driving gear and transmission gear are (15) engages the drive sprocket I (10) through the chain I (11) and the driven sprocket I (14) were connected to the drive, the drive motor (I) followed by the drive sprocket I (10), a driven chain Round I (14), drive gear (15) driven by each drive gears, each drive gear rotates the filter drum.
Drum according to claim 2, wherein the microfiltration unit, characterized in that said gear set comprises a gear I (12), drive gear II (13) and a transmission gear III (16), a transmission gear I (12 ), drive gear II (13) and a drive gear IIK16) are provided with three filter drum drive motor (I) adjacent one end of the end face.
According to claim 1, wherein the drum microfiltration, characterized in that said transmission system (2) is set to complete chain drive, chain drive system includes a drive sprocket entirely II (25) and the drive sprocket set, drive sprocket II (25) fixed to the drive motor (I) of the output shaft, each drive sprocket of the sprocket group `filter located roller set (5) with a drive motor for each cylinder (I) adjacent one end end surface, the drive sprocket II (25) through the chain II (21) is drivingly connected to each drive sprocket, the drive motor (I) by the drive sprocket II (25) to drive each of the drive sprocket is rotated, each transmission Filter driven sprocket roller set (5) of each drum rotation.
5. A machine according to claim 4 wherein the drum microfiltration, characterized in that the drive has a drive sprocket set includes sprockets I (17), drive sprocket II (18) and a drive sprocket III (19) , drive sprocket I (17), drive sprocket II (18) and a drive sprocket 111 (19) are provided on three rollers and a driving motor (I) adjacent one end of the end face.
The drum-microfiltration according to claim 1, characterized in that when the water microfiltration machine outside the drainage component to the suction tube (23), one end of the suction tube (23) setting between the bristles (20), bristles (20) is located in the suction tube (23) and the filter drum set (5) and the inner multifunctional shaft (6) connected on the multi-axis (6), the port at the other end with a .
7. The drum microfiltration according to claim 1, characterized in that when the microfiltration water use within the drainage component is set to high-pressure washing tube (26), high-pressure washing tube (26) of one end between the bristles (20), bristles (20) is located in high-pressure washing tube (26) and the filter drum set (5) and the inner multifunctional shaft (6) connected on the multi-axis (6), the port at the other end with a .
8. A machine according to claim 1, wherein the microfiltration drum, characterized in that the lower part of said slag discharge tube (8) has a plurality of distribution holes siphon.
9. A machine according to claim 1, wherein the microfiltration drum, characterized in that said filter support wire drum (22) provided with filter surfaces (9).
According to claim 1, wherein the drum microfiltration, characterized in that said settling tank filter (24) is provided on top of an electrical control system (4), electrical control system (4) is connected
收藏