三輥卷板機設計,三輥卷,板機,設計
本科畢業設計
三輥卷板機設計
系部名稱：
專業班級：
學生姓名：
指導教師：
職 稱：
安 陽 工 學 院
The Graduation Design for Bachelor's Degree
Design of Small Three Roller
Coilling Machine
Candidate：Liao Lingzhi
Specialty：Meterial Processing and Ccontrol Engineering
Class：B03-66
Supervisor：Advanced Engineering Xin Zhongsheng
Heilongjiang Institute of Technology
2007-06.Harbin
畢業設計
摘 要
本設計是關于對稱式三輥卷板機的設計，主要對卷板機上、下輥及減速器進行設計和計算。
設計前部分詳細闡述了卷板機上、下輥結構設計和受力分析。板機結構型式為三輥對稱式, 在該結構中上輥下壓提供壓力,兩下輥做旋轉運動,為卷制板材提供扭矩。它具有結構簡單、體積小、重量輕、經濟、等優點。動力源則選擇了YZ系列YZ160L—6型電機，其工作特性優于Y系列電機，適用于有輕微震動，正反轉且轉速不高的場合。
總體設計后部分所涉及的減速器采用了三級展開式圓柱齒輪結構。齒輪材料為40Cr，并經調質及表面淬火。校核齒輪、軸、鍵、軸承確保了設計的實際可行性。
關鍵詞: 卷板機；電動機；減速器；鍵；齒輪
ABSTRACT
This design is about the three-roller symmwtry rolling machine,mainly calcats the up and down roller and the decelerator
During the front process of the design,the rolling machine`s structucre design and the analysis of strength are described. The rolling machine` structure is three-roller symmetry. Pressure provides pressure under owing structure the above-average roller , the roller does revolution sport under two , sheet material provides moment of torsion to roll of system.It has a series of advantages such as simply structure,small volume,light weight,economical and so on.YZ type YZ-160L-6 motor is selected as the power source,which adapts situation such as slience quenching and light reverse velocity.
The last part of the paper is ahout decelerator which is choosing triple expanding columm gear constiuction .The material of gear is 40Cr which has been hardening surface.The gears, axes, keys, bearings are checked, so to confirm this design is practical
Key words: Rolling machine；Motor；Decelerator；Key；Gear
II